BS 1363-2 Figure 14 Non-contact Test Gauge

BS 1363-2 Figure 14 Non-contact Test Gauge is meticulously engineered to validate the structural and dimensional compliance of plugs and sockets with the BS 1363 standard, specifically as outlined in Figure 14 of BS 1363-2. It strictly adheres to the standard’s specifications for dimensions, tolerances, material properties, hardness, and surface roughness, featuring a material hardness exceeding 50HRC and a low thermal expansion coefficient. These characteristics guarantee superior dimensional stability and reliability, facilitating accurate and consistent non-contact inspections for quality assurance.

Specifications

• Compliance standard: BS 1363-2 Figure 14
• Material hardness: Over 50HRC
• Material thermal expansion coefficient: Low
• Linear dimensions: Specified in millimetres
• Material options: Suitable conducting material; Insulating or conducting material
• Key attributes (dimensions, tolerances, material, surface roughness): Fully compliant with BS 1363 standard requirements
• Dimensional stability: Reliable and consistent due to low thermal expansion coefficient

Test Procedures

1. Prepare the plug or socket sample for testing, ensuring it is free from damage, dust, or contaminants that may affect inspection accuracy.
2. Inspect the test gauge to confirm its surface is clean, free from wear or deformation, and that all structural features meet the standard’s specifications.
3. Position the sample and the gauge according to the requirements of BS 1363-2 Figure 14, ensuring proper alignment for non-contact measurement.
4. Conduct non-contact inspection to assess the sample’s structural design, verifying that critical features align with the gauge’s calibrated parameters.
5. Measure and cross-verify the sample’s key dimensions against the gauge’s specified values to ensure adherence to tolerance limits.
6. Record the test results comprehensively, indicating whether the sample meets the BS 1363 standard based on the non-contact inspection outcomes.

Applications

Non-contact testing for plug and socket conformity…