UL 1989:2023/UL 1418:2022 50.8mm Impact Test Sphere (Unmounted)
Leave a Message
The UL 1989:2023/UL 1418:2022 50.8mm Impact Test Sphere (Unmounted) is a precision-calibrated instrument engineered to validate the mechanical impact resistance of equipment enclosures and internal components in accordance with UL safety standards. Fabricated from solid carbon steel to ensure consistent mass properties and structural durability, its 50.8mm (2-inch) spherical geometry and 535g calibrated mass deliver standardized impact energy to simulate operational hazards—including accidental drops or incidental mechanical contact. The unmounted configuration eliminates suspension hardware requirements, facilitating stable positioning in fixed test fixtures for enhanced measurement repeatability. This instrument is essential for manufacturers conducting compliance verification to confirm that products maintain structural integrity under impact conditions without fracture, deformation, or exposure of hazardous internal components, thereby meeting UL certification requirements.
Specifications:
Compliance Standards: UL 1989:2023; UL 1418:2022
Material Composition: Solid carbon steel (density: 7.85g/cm³; high rigidity—maintains dimensional stability under standard impact loading; corrosion-resistant)
Critical Dimensions & Mass Parameters:
– Diameter: 50.8mm (2 inches) ± 0.1mm
– Mass: 535g ± 5g (calibrated to UL standard impact energy requirements)
Surface Finish: Precision-deburred spherical surface (prevents artifact generation on test specimens; ensures uniform impact force distribution)
Standard Impact Height Range: 1.0–2.0 meters (adjustable per UL standard test protocols; specified by product classification)
Primary Function: Delivers controlled mechanical impact to assess enclosure structural integrity; verifies absence of hazardous component exposure post-impact; facilitates UL compliance verification
Test Procedures:
1. Conduct visual inspection of the test sphere for surface defects, cracks, or geometric irregularities—confirm spherical conformity within tolerance specifications.
2. Secure the equipment under test (EUT) on a vibration-isolated, non-slip test platform (e.g., battery enclosure, CRT assembly).
3. Configure the test apparatus to the UL-mandated impact height parameter (e.g., 1.5m for battery compliance testing).