Electrical Safety Test
Cone Calorimeter
Model: LS-ISO5660
ISO 5660-1 compliant Cone Calorimeter for precise heat release rate, smoke production, and mass loss rate measurements in material fire safety testing.
ISO 5659 NBS Smoke Density Chamber
Model: LS-ISO5659
Designed to ISO 5659, this chamber measures smoke density with a 50 kW/m² heat flux.
ISO 5659-1 NBS Smoke Density Chamber
Model: LS-ISO5659
ISO 5659-1 compliant NBS smoke density chamber with 50kW/m² conical radiant furnace for optical density and mass loss rate testing of materials.
IMO Flame Spread Test Apparatus
Model: LS-ISO5658-2
IMO Flame Spread Test Apparatus compliant with ISO 5658-2, IMO FTP Code Resolution A.653(16), and ASTM E1317 for lateral flame propagation testing of building materials.
LS-IR1515Y High-Voltage Insulation Resistance Tester
Model: LS-IR1515Y
IEC 60270-compliant high-voltage insulation resistance tester for substation and high-capacitance environments with true-color touchscreen and data logging capabilities.
GB/T 14645-2014 Textile Flammability Testing Apparatus
Model: LS-GBT14645
GB/T 14645-2014 compliant textile flammability testing apparatus for 45° damaged area and ignition times determination. Meets ASTM D1230 standards for flame retardant performance evaluation.
45-Degree Flame Propagation Rate Test Apparatus
Model: LS-GBT14644-2
Conforms to ASTM D1230, NFPA 702, and GB/T 14644-2014 standards for precise textile fabric flammability assessment. Measures flame propagation time at 45° angle, designed for compliance verification in textile quality control.
LS-FAA25F Vertical Bunsen Burner Test System for Aircraft Cabin and Cargo Compartment Materials
Model: LS-FAA25F
Vertical Bunsen Burner Test System compliant with FAA Part 25 Appendix F Part I, FAR 25.853, and FAR 25.855 for aircraft interior material flammability testing.
IEC 60335-2-2 Clause 21.104 Vacuum Cleaner Hose Torsion Testing System
Model: LS-B77
This testing apparatus validates vacuum cleaner hose torsion resistance per IEC 60335-2-2 Clause 21.104 and GB/T 4706.7 Clause 21.104 requirements, performing 20 cycles at 10 r/min with integrated electrical strength verification. Designed for compliance testing laboratories.